Translate

Wednesday, 23 November 2016

Multidirectional Equipment for Magnetic Particle Inspection.

Multidirectional units allow the component to be magnetized in two directions, longitudinally and circumferentially, in rapid succession.  Therefore, inspections are conducted without the need for a second shot in multidirectional units, the two fields are balanced so that the field strength are equal in both directions. These quickly changing balanced fields a multidirectional field in the component detection of defects lying in more than one direction.
Just as conventional wet-hirizontal systems the electrical current used in multidirectional magnetization may be Alternating half-wave direct, or full-sized. It is also possible to use a combination of currents depending on the test applications.Multidirectional magnetization can be used for a large number of production application, and high volume inspections.
To determine adequate field strength and balance of the rapidly changing fields,techniques development requires a little more effort when multirectional equipment is used. It is desirable to develop the technique using a component with known defects oriented in at least two directions, or a manufactured defect standard. Quantitative Quality Indicators (QQI)  are also often used to verify the strength and direction of magnetic fields.